View HA-2640883_346935.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HA-2640/883 Die Characteristics
DIE DIMENSIONS: 93 x 68 x 19 mils 1 mils 2360 x 1720 x 483m 25.4m METALLIZATION: Type: Al, 1% Cu Thickness: 16kA 2kA GLASSIVATION: Type: Nitride (Si3N4) over Silox (SiO2, 5% Phos.) Silox Thickness: 12kA 2kA Nitride Thickness: 3.5kA 1.5kA WORST CASE CURRENT DENSITY: 5.0 x 104 A/cm2 at 12mA SUBSTRATE POTENTIAL (Powered Up): Unbiased TRANSISTOR COUNT: 76 PROCESS: HV200 Bipolar Dielectric Isolation
Metallization Mask Layout
HA-2640/883
BAL
COMP
-IN
V+
OUT +IN
V-
BAL
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
Spec Number 3-201
511029-883
Specifications HA-2640/883
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS Device Characterized at: VSUPPLY = 40V, RLOAD = 5k, CLOAD = 10pF, AV = 1V/V, Unless Otherwise Specified. LIMITS PARAMETERS Differential Input Resistance Full Power Bandwidth Minimum Closed Loop Stable Gain Output Short Circuit Current SYMBOL RIN FPBW CONDITIONS VCM = 0V VPEAK = 10V VPEAK = 35V CLSG RL = 5k, CL = 50pF VOUT = 0V, RL = 10 VOUT = 0V, RL = 10 Open Loop VOUT = 0V, IOUT = 0mA NOTES 1 1, 2 1, 2 1 TEMPERATURE +25oC +25oC +25oC -55oC to +125oC MIN 50 45 13.6 1 MAX UNITS M kHz kHz V/V
+ISC -ISC
1 1 1 1, 3
+25oC +25oC +25oC -55oC to +125oC
-25 -
25 600 320
mA mA mW
Output Resistance Quiescent Power Consumption NOTES:
ROUT PC
1. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These parameters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characterization based upon data from multiple production runs which reflect lot to lot and within lot variation. 2. Full Power Bandwidth guarantee based on Slew Rate measurement using FPBW = Slew Rate/(2VPEAK). 3. Power Consumption based upon Quiescent Supply Current test maximum. (No load on outputs.)
TABLE 4. ELECTRICAL TEST REQUIREMENTS MIL-STD-883 TEST REQUIREMENTS Interim Electrical Parameters (Pre Burn-In) Final Electrical Test Parameters Group A Test Requirements Groups C and D Endpoints NOTE: 1. PDA applies to Subgroup 1 only. SUBGROUPS (SEE TABLES 1 AND 2) 1 1 (Note 1), 2, 3, 4, 5, 6 1, 2, 3, 4, 5, 6 1
Spec Number 3-200
511029-883
Specifications HA-2640/883
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Tested at: VSUPPLY = 40V, RSOURCE = 100, RLOAD = 500k, VOUT = 0V, Unless Otherwise Specified. LIMITS PARAMETERS Output Voltage Swing SYMBOL +VOUT CONDITIONS RL = 5k GROUP A SUBGROUPS 1 2, 3 -VOUT RL = 5k 1 2, 3 Output Current +IOUT -IOUT Quiescent Power Supply Current +ICC VOUT = -10V VOUT = +10V VOUT = 0V, IOUT = 0mA 4 4 1 2, 3 -ICC VOUT = 0V, IOUT = 0mA 1 2, 3 Power Supply Rejection Ratio +PSRR VSUP = 30V, V+ = +10V, V- = -40V, V+ = +40V, V- = -40V VSUP = 30V, V+ = +40V, V- = -10V, V+ = +40V, V- = -40V Note 1 4 5, 6 4 5, 6 1 2, 3 -VIOAdj Note 1 1 2, 3 NOTE: 1. Offset adjustment range is [VIO (Measured) 1mV] minimum referred to output. This test is for functionality only to assure adjustment through 0V. TEMPERATURE +25oC +125oC, -55oC MIN 35 35 12 -3.8 -4.0 80 80 80 80 VIO-1 VIO-1 VIO+1 VIO+1 MAX -35 -35 -12 3.8 4.0 UNITS V V V V mA mA mA mA mA mA dB dB dB dB mV mV mV mV
+25oC +125oC, -55oC
+25oC +25oC +25oC +125oC, -55oC
+25oC +125oC, -55oC
+25oC +125oC, -55oC
-PSRR
+25oC +125oC, -55oC +25oC +125oC, -55oC
Offset Voltage Adjustment
+VIOAdj
+25oC +125oC, -55oC
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = 40V, RSOURCE = 50, RLOAD = 5k, CLOAD = 50pF, AVCL = +1V/V, Unless Otherwise Specified. LIMITS PARAMETERS Slew Rate SYMBOL +SR -SR Rise and Fall Time TR TF Overshoot +OS -OS CONDITIONS VOUT = -3V to +3V VOUT = +3V to -3V VOUT = 0 to +200mV 10% TR 90% VOUT = 0 to -200mV 10% TF 90% VOUT = 0 to +200mV VOUT = 0 to -200mV GROUP A SUBGROUPS 4 4 4 TEMPERATURE +25oC +25oC +25oC +25oC +25oC +25oC MIN 3 3 MAX 135 UNITS V/s V/s ns
4
-
135
ns
4 4
-
30 30
% %
Spec Number 3-199
511029-883
Specifications HA-2640/883
Absolute Maximum Ratings
Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . 100V Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37V Output Current . . . . . . . . . . . . . . . . . . . .Full Short Circuit Protection Output Short Circuit Duration . . . . . . . . . . . . . . . . . . . . . . 5 Seconds Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . . . . . +300oC
Thermal Information
Thermal Resistance JA JC CerDIP Package . . . . . . . . . . . . . . . . . . . 115oC/W 28oC/W Ceramic LCC Package . . . . . . . . . . . . . . 65oC/W 15oC/W Metal Can Package . . . . . . . . . . . . . . . . . 155oC/W 67oC/W Package Power Dissipation Limit at +75oC for TJ +175oC CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870mW Ceramic LCC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.54W Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 645mW Package Power Dissipation Derating Factor Above +75oC CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.7mW/oC Ceramic LCC Package . . . . . . . . . . . . . . . . . . . . . . . . 15.4mW/oC Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5mW/oC
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Temperature Range . . . . . . . . . . . . . . . . -55oC to +125oC Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . 10V to 40V VINCM 1/2 (V+ - V-) RL 500
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = 40V, RSOURCE = 100, RLOAD = 500k, VOUT = 0V, Unless Otherwise Specified. LIMITS PARAMETERS Input Offset Voltage SYMBOL VIO CONDITIONS VCM = 0V GROUP A SUBGROUPS 1 2, 3 Input Bias Current +IB VCM = 0V, +RS = 100k, -RS = 100 VCM = 0V, +RS = 100, -RS = 100k VCM = 0V, +RS = 100k, -RS = 100k V+ = 15V, V- = -65V 1 2, 3 1 2, 3 1 2, 3 1 2, 3 -CMR V+ = 65V, V- = -15V 1 2, 3 Large Signal Voltage Gain +AVOL VOUT = 0V and +30V, RL = 5k VOUT = 0V and -30V, RL = 5k VCM = +20V, V+ = +20V, V- = -60V, VOUT = -20V VCM = -20V, V+ = +60V, V- = -20V, VOUT = +20V 4 5, 6 4 5, 6 4 5, 6 4 5, 6 TEMPERATURE +25oC +125oC, -55oC MIN -4 -6 -25 -50 -25 -50 -12 -35 25 25 100 75 100 75 80 80 80 80 MAX 4 6 25 50 25 50 12 35 -25 -25 UNITS mV mV nA nA nA nA nA nA V V V V kV/V kV/V kV/V kV/V dB dB dB dB
+25oC +125oC, -55oC
-IB
+25oC +125oC, -55oC +25oC +125oC, -55oC
Input Offset Current
IIO
Common Mode Range
+CMR
+25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC
-AVOL
Common Mode Rejection Ratio
+CMRR
-CMRR
Spec Number 3-198
511029-883
HA-2640/883
July 1994
High Voltage Operational Amplifier
Description
HA-2640/883 monolithic operational amplifier is designed to deliver unprecedented dynamic specification for a high voltage internally compensated device. This dielectrically isolated device offer very low values for offset voltage and offset current coupled with large output voltage swing and common mode input voltage. For maximum reliability, the HA-2640/883 offers unconditional output overload protection through output short circuit current limiting. This circuitry will limit the output to typically 25mA output drive current. These amplifiers deliver 35V common mode input voltage swing, 35V output voltage swing, and up to 40V supply range for use in such designs as regulators, power supplies, and industrial control systems. The 5MHz typical gain-bandwidth product and 5V/s slew rate (typ) make these devices excellent components for high performance signal conditioning applications. To insure compliance, all devices are 100% tested for slew rate, rise/fall time and overshoot. Outstanding input and output voltage swings coupled with a low 5nA offset current (typ), make these amplifiers excellent components for resolver excitation designs.
Features
* This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. * Output Voltage Swing . . . . . . . . . . . . . . . . . . 35V (Min) * Supply Voltage . . . . . . . . . . . . . . . . . 10V to 40V (Min) * Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . 3V/s (Min) * Common Mode Input Voltage Swing . . . . . . 35V (Min) * Offset Current. . . . . . . . . . . . . . . . . . . . . . . . 12nA (Max) * Unity Gain Bandwidth . . . . . . . . . . . . . . . . . 5MHz (Typ) * Output Overload Protection
Applications
* Industrial Control Systems * Power Supplies * High Voltage Regulators * Resolver Excitation * Signal Conditioning
Ordering Information
PART NUMBER HA2-2640/883 HA4-2640/883 HA7-2640/883 TEMPERATURE RANGE -55oC -55oC to to +125oC +125oC PACKAGE 8 Pin Can 20 Lead Ceramic LCC 8 Lead CerDIP
-55oC to +125oC
Pinouts
HA-2640/883 (CERDIP) TOP VIEW HA-2640/883 (CLCC) TOP VIEW
COMP BAL NC NC NC
HA-2640/883 (METAL CAN)
COMP 8 BAL 1 18 NC + 3 4 V5 7 V+
BAL -IN +IN V-
1 2 3 4 +
8 7 6 5
COMP V+ OUT BAL
3 NC -IN NC +IN NC 4 5 6 7 8
2
1 20 19
+
17 V+ 16 NC 15 OUT 14 NC
-IN
2
6 OUT
+IN
BAL
9 10 11 12 13 BAL NC VNC NC
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. http://www.intersil.com | Copyright (c) Intersil Corporation 1999
Spec Number
3-197
511029-883 File Number 3702

▲Up To Search▲

Price & Availability of HA-2640883

	To Download HA-2640883 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .